dimensions unit: mm s ty le d i m e n sio n u ltra miniature l ?d h ?d pnp100 6.30.5 2.50.3 282.0 0.550.05 pnp200 9.00.5 3.50.3 262.0 0.550.05 pnp300 11.51.0 4.60.5 352.0 0.80.05 pnp400 15.51.0 5.20.5 332.0 0.80.05 fe atures power rating 1w, 2w, 3w, 4w resistance tolerance 1%, 5% t.c.r. 300ppm/c flameproof multi-layer coating meets ul-94v-0 flameproof feature meets overload test ul-1412 der ating cur ve for resistors operated in ambient temperatures above 70c, power rating must be derated in accordance with the curve below. int roduction the resistor element is a resistive wire which is wound in a single layer on a ceramic rod, with tinned connecting wires of electrolytic copper welded to the end-caps. the ends of the resistive wire are connected to the caps by welding. the resistors are coated with layers of green color flame-proof lacquer. high power in small packages. high power type ultra miniature style [ pnp series ] 5th color code: violet ?d h l ?d rated load (% ) ambient temperature (c) 300 250 200 150 100 50 100 80 60 40 20 70 200 275 c wirewound resistors through-hole resis t ors
55 high power type ultra miniature style [ pnp series ] electrical char acteristics s ty le pnp100 pnp200 pnp300 pnp400 power rating at 70c 1w 2w 3w 4w maximum working voltage pxr voltage proof on insulation 300v resistance range (1%) 0.22 - 130 0.1 - 820 0.1 - 2.2k 0.1 - 2.8k resistance range (5%) 0.1 - 130 0.1 - 820 0.1 - 2.2k 0.1 - 2.8k operating temp. range -40c to +200c temperature coeffcient 300ppm/c note: special value is available on request env ironme ntal char acteristics p er f or manc e t es t t es t m e t ho d app r a ise short time overload iec 60115-1 4.13 10 times rated power for 5 sec. 2.0%+0.05 voltage proof on insulation iec 60115-1 4.7 in v-block for 60 sec., test voltage by type by type temperature coeffcient iec 60115-1 4.8 -55c to +155c by type insulation resistance iec 60115-1 4.6 in v-block for 60 sec. >100m solderability iec 60115-1 4.17 2355c for 30.5 sec. 95% min. coverage solvent resistance of marking iec 60115-1 4.30 ipa for 50.5 min. with ultrasonic no deterioration of coatings and markings robustness of terminations iec 60115-1 4.16 direct load for 10 sec. in the direction of the terminal leads 2.5kg (24.5n) damp heat steady state iec 60115-1 4.24 402c, 90-95% rh for 56 days, loaded with 0.1 times rcwv 5.0%+0.05 endurance at 70c iec 60115-1 4.25 702c at rcwv for 1,000 hr. (1.5 hr. on, 0.5 hr. off) 5.0%+0.05 temperature cycling iec 60115-1 4.19 -55c ? room temp. ? +155c ? room temp. (5 cycles) 1.0%+0.05 resistance to soldering heat iec 60115-1 4.18 2603c for 101 sec., immersed to a point 30.5mm from the body 1.0%+0.05 accidental overload test iec 60115-1 4.26 4 times rcwv for 1 min. no evidence of faming or arcing note: rcwv(rated continuous working voltage) = power rating x resistance value or max. working voltage listed above, whichever less. revision: 201304 note:
|
